TAP CONNECTORS
PART # 91801
PART # 91800
PART # 91802
PART # 91803
PART # 91804
Run & Tap splicing. Maximum insulation O.D.diameter of 0.145 inches (3,68 mm) and a operating temperature of 194(deg)F (90(deg)C).
Conductor Sizes18 - 16 AWG / 14 AWG Stranded
Connection Type Double Run or Tap
*FOR MOISTURE RESISTANT VERSION ADD "MR" AFTER
PART NUMBER
Use to electrically connect two wires in a tap, in-line, pigtail, or double run installation, and insulate the connection. For low voltage (automotive) applications. Maximum insulation O.D.diameter of 0.110 inches (2,79 mm) Tap, 0.145 inches (3,68 mm) Run applications and a operating temperature of 194(deg)F (90(deg)C).
Conductor Sizes 22 - 18 AWG (Tap), 18 - 14 AWG (Run)
Connection Type Double Run or Tap
Dry environment applications. Maximum insulation O.D.diameter of 0.145 inches (3,68 mm) and a operating temperature of 194(deg)F (90(deg)C).
Conductor Sizes
22 - 16 AWG (Tap), 18 - 16 AWG / 14 AWG Stranded, 18 - 14 AWG (Tap), 22 - 18 AWG (Tap), 18 - 14 AWG (Run), 18 - 14 AWG (Tap), 12 - 10 AWG (Run), 12 AWG / 10 AWG Stranded, 18 - 16 AWG / 14 AWG Stranded (Tap), 18 - 22 AWG, 18 - 14 AWG
Connection Type
Run and Tap, Double Run or Tap
Use to electrically connect a wire end (tap) to a through (run) wire and insulate the connection. Maximum insulation O.D.diameter of 0.190 inches (4,82 mm) and a operating temperature of 221(deg)F (105(deg)C).
Conductor Sizes
12 AWG / 10 AWG Stranded Connection Type
Double Run or Tap
Electrically connects a (tap) wire end to a through (run) wire and insulates the connection. Flame retardant. Self-stripping. Used for tap splicing. Dual element connection. Maximum insulation O.D.diameter of 0.145 inches (3,68 mm) Tap, 0.190 inches (4,82 mm) Run and a operating temperature of 221(deg)F (105(deg)C).
Conductor Sizes
18 - 14 AWG (Tap), 12 - 10 AWG (Run)
Connection Type Run and Tap
PART # 91805
Disconnect. Use to electrically tap into a wire in mid-span without cutting or stripping the wire. Connector then mates with a .156 inch male bullet, making a reusable plug connect wiring termination. Maximum insulation O.D.diameter of 0.145 inches (3,68 mm) and a operating temperature of 194(deg)F (90(deg)C).
Conductor Sizes
18 - 14 AWG (Tap)
Connection Type Run and Tap
PART # 91812
Tap Connector Fuse Holders are used to install a blade-type automotive fuse between power source and device.
12A at 32V maximum. For use with ATC style fuse.